Boards
Every board page renders the MCUID data record for that board: identity, revisions, ordering variants, pin headers and published fields with their fixed sources.
ESP32-S3-DevKitC-1
Official Espressif ESP32-S3 entry-level evaluation board, assembled with ESP32-S3-WROOM-1, -1U or -2 modules, dual 22-pin headers (J1/J3), onboard addressable RGB LED, USB-to-UART bridge and native USB OTG port.
Raspberry Pi Pico
RP2040 microcontroller board with 2 MB flash, 40-pin 2.54 mm castellated/through-hole DIP format (51 x 21 mm), micro-USB B for power/data and drag-and-drop mass-storage flashing, 3-pin SWD pads at the bottom edge. No module layer: the RP2040 chip is soldered directly on the board.
Raspberry Pi Pico 2
RP2350A microcontroller board with 4 MB flash, hardware- and software-compatible with Raspberry Pi Pico: same 40-pin 2.54 mm castellated/through-hole format, same pinout, micro-USB B with drag-and-drop UF2 flashing and 3-pin SWD pads. No module layer: the RP2350A chip is soldered directly on the board.
ESP32-DevKitC
Official Espressif ESP32 evaluation board. V4 (current) assembles ESP32-WROOM-32E/32UE or ESP32-WROVER-E/IE modules on dual 19-pin headers (J2/J3), with a single micro-USB port through a USB-to-UART bridge, EN/Boot buttons and a 5 V power-on LED. There is no user-programmable onboard RGB LED on this board.